Қазақ ұлттық қыздар педагогикалық университеті / Казахский национальный женский педагогический университет

Постоянный URI для этого сообществаhttps://cris.qyzpu.kz/handle/123456789/1

Просмотр

Результаты поиска

Показано: 1 - 10 из 15
  • Некоторые метрики заблокированы вашими 
    Тип записи:Публикация,
    Preparation of Granular Organic Iodine and Selenium Complex Fertilizer Based on Biochar for Biofortification of Parsley
    (Hindawi Publishing Corporation, 2024-01-01)
    Yerlan Doszhanov
    ;
    ;
    Jakpar Jandosov
    ;
    Karina Saurykova
    ;
    Zhandos Bassygarayev
    This study investigates the potential of biochar derived from various biomass sources: apricot kernel (AK), pine sawdust (PS), rice husk (RH), wheat straw (WS), and reed stem (RS) to enhance the yield, nutritional quality, and environmental sustainability of parsley crops. Comprehensive characterization through SEM, EDAX, nitrogen adsorption–desorption isotherms, and FTIR analyses identified AK biochar as the most suitable for further enrichment due to its superior specific surface area (512.3 m2/g) and iodine number (51.23 mg/g). EDAX analysis revealed that AK biochar exhibited the highest carbon content (92.1%), while RH biochar contained the highest silicon content (46%), indicating different potential applications. FTIR analysis identified key functional groups, such as carbonyl (1740 cm⁻1) and hydroxyl (3430 cm⁻1) groups, which contribute to the biochar’s reactivity and potential effectiveness in various applications. The effects of selenium (Na2SeO4), iodine (KI), their combination (Na2SeO4 + KI), and BISF (biochar‐enriched iodine and selenium fertilizer) on parsley growth, antioxidant properties, and nutrient accumulation were evaluated. The results demonstrated that joint applications of iodide and selenate led to a 3.1‐fold increase in iodine content (up to 16.8 mg/kg d.w.) and a 1.2‐fold increase in selenium accumulation (up to 2482.1 μg/kg d.w.) in parsley compared to separate treatments. Additionally, BISF treatment significantly improved key biometric parameters, with leaf weight increasing by 1.6 times (up to 326.5 g) compared to the control, and antioxidant content—ascorbic acid, polyphenols, and antioxidant activity—showing increases of 1.56, 1.27, and 1.50 times, respectively. This study underscores the effectiveness of selenium‐ and iodine‐enriched biochar in enhancing parsley crop yield and nutritional quality while also demonstrating the multifunctional role of biochar in environmental remediation.
    Цитирования (OpenAlex) 6Цитирования (OpenCitations) 3
  • Некоторые метрики заблокированы вашими 
    Тип записи:Публикация,
    Production and optimization of activated carbon from plant waste with high specific surface area for moisture-saving applications in agriculture
    (2024-10-20)
    Yerlan Doszhanov
    ;
    ;
    Karina Saurykova
    ;
    Zulkhair Aimukhametovich Mansurov
    ;
    In conditions of water shortage, sustainable agricultural development requires the use of water-saving technologies, including the use of water-retaining substrates based on activated carbon. In this work, the textural and adsorption characteristics of activated carbon obtained from plant waste were studied at different mass ratios of the sorbent and KOH (1:1, 1:2, 1:3 and 1:4). The aim of the study was to determine the optimal activation conditions for creating a material with a high specific surface area and a developed porous structure. The results showed that the largest pore volume (1.6 cm3/g) and a high degree of microporosity are achieved at a ratio of 1:3, which is confirmed by the analysis of pore distribution using the DFT and BJH methods. FTIR spectroscopy revealed the presence of functional groups (O–H, C=O and C–O) that contribute to water conservation. The differential pore volume distribution (dv(r), cm3/Å/g) also demonstrated that at a ratio of sorbent and KOH (1:3), the sample structure optimally combines micropores and mesopores, which increases the adsorption capacity of carbon.
    Цитирования (OpenAlex) 1
  • Некоторые метрики заблокированы вашими 
    Тип записи:Публикация,
    1-Carboxy-2-phenylethan-1-aminium Iodide 2-Azaniumyl-3-phenylpropanoate Crystals: Properties and Its Biochar-Based Application for Iodine Enrichment of Parsley
    (Multidisciplinary Digital Publishing Institute, 2025-10-06) ; ;
    Almagul Kerimkulova
    ;
    Yerlan Doszhanov
    ;
    Karina Saurykova
    Iodine deficiency remains a significant nutritional problem, which stimulates the search for sustainable approaches to biofortification of vegetable crops. The aim of the work was to develop a "smart" bio-iodine fertilizer based on the organoiodide complex 1-carboxy-2-phenylethan-1-aminium iodide 2-azaniumyl-3-phenylpropanoate (PPI) and highly porous biochar from agro-waste, assessing its efficiency on the parsley model. PPI was synthesized and characterized (IR/UV spectroscopy, thermal analysis), biochar was obtained by KOH activation and studied by low-temperature nitrogen adsorption (S_BET) methods, as well as standard physicochemical characterization. The granulated composition PPI + biochar (BIOF) was tested in pot experiments in comparison with KI and control; The biomass of leaves and roots, iodine and organic nitrogen content, and antioxidant indices (ascorbic acid, total polyphenols, antioxidant activity) were assessed. BIOF provided a significant increase in yield and nutrition: leaf mass reached 86.55 g/plant versus 77.72 g/plant with KI and 65.04 g/plant in the control; root mass — up to 8.25 g/plant (p<0.05). Iodine content in leaves and roots increased to 11.86 and 13.23 mg/kg (d. w.), respectively, while organic nitrogen levels increased simultaneously (57.37 and 36.63 mg/kg). A significant increase in the antioxidant status was noted (ascorbic acid 36.46 mg/100 g dry weight; antioxidant activity 44.48 mg GA/g; polyphenols 23.79 mg GA/g). The presented data show that the combination of PPI with activated biochar forms an effective platform for controlled supply of iodine to plants, increasing the yield and functional qualities of products; the prospects for implementation are associated with field trials and dosage optimization.
  • Некоторые метрики заблокированы вашими 
    Тип записи:Публикация,
    Zeolites and Activated Carbons in Hydroponics: A Systematic Review of Mechanisms, Performance Metrics, Techno-Economic Analysis and Life-Cycle Assessment
    (Multidisciplinary Digital Publishing Institute, 2025-12-08)
    Dana Akhmetzhanova
    ;
    ;
    Yerlan Doszhanov
    ;
    ;
    Karina Saurykova
    The sustainable operation of hydroponic systems depends on maintaining the chemical stability of circulating nutrient solutions and preventing the accumulation of toxic compounds. The accumulation of phytotoxic ammonium, heavy metals, and organic metabolites in recirculating nutrient solutions remains one of the key challenges limiting the efficiency, sustainability, and scalability of hydroponic cultivation. This review provides a comprehensive comparative analysis of zeolites, activated carbons (ACs), and their functionalized and composite forms as key sorbents for nutrient management, contaminant removal, and environmental safety in hydroponic cultivation. Natural zeolites, with their well-defined crystalline structure and high ion-exchange selectivity toward ammonium and heavy metal cations, enable effective NH4+/K+ balance regulation and phytotoxicity mitigation. ACs, characterized by high specific surface area and tunable surface chemistry, complement zeolites by offering extensive adsorption capacity for organic compounds, root exudates, and pesticide residues, thereby extending the operational lifespan of nutrient solutions and improving overall system performance. Further advancements include the integration of zeolites and ACs with two-dimensional (graphene, g-C3N4) and three-dimensional (MOF, COF) frameworks, yielding multifunctional materials that combine adsorption, ion exchange, photocatalysis, and nutrient regulation. Transition-metal modification, particularly with Fe, Mn, Cu, Ni, and Co, introduces redox-active centers that enhance sorption, catalysis, and phosphate stabilization. The comparative synthesis reveals that the combined application of zeolite- and carbon-based composites offers a synergistic strategy for developing adaptive and low-waste hydroponic systems. From a techno-economic and environmental standpoint, the judicious application of these materials paves the way for more resilient, efficient, and circular hydroponic systems, reducing fertilizer and water consumption, lowering contaminant discharge, and enhancing food security. This systematic review was conducted according to the PRISMA 2020 guidelines. Relevant studies were identified through Scopus, Web of Science, and Google Scholar databases using specific inclusion and exclusion criteria.
    Цитирования (OpenAlex) 5Цитирования (OpenCitations) 1
  • Некоторые метрики заблокированы вашими 
    Тип записи:Публикация,
    The Iodine–Dextrin–Lithium Complex: Morphology, Antibacterial Activity, and Cytotoxicity
    (Multidisciplinary Digital Publishing Institute, 2025-12-18)
    Daniil Shepilov
    ;
    ;
    Ardak B. Jumagaziyeva
    ;
    Tamara Bukeyeva
    ;
    Dana A. Askarova
    A new iodine-dextrin-lithium complex (IDLC) was synthesized and structurally characterized as a hybrid supramolecular system combining antiseptic, stabilizing, and biocompatible components. The compound integrates iodine as the primary antimicrobial agent, lithium as a coordination and stabilization element, and dextrin as a biodegradable polysaccharide matrix enabling sustained release. Physicochemical analyses confirmed the formation of a uniform, thermally stable complex. Biological evaluation revealed strong bactericidal activity, with minimum bactericidal concentrations (MBC) ranging from 1.95 to 15.63 µg ml-1 against both Gram-positive and Gram-negative pathogens, including multidrug-resistant Staphylococcus aureus and Acinetobacter baumannii. The complex also demonstrated inhibitory effects in virus-infected MDCK cell cultures. Cytotoxicity studies showed CC50 = 0.23-0.48 mg ml-1 on human MNCs and more than 10 mg ml-1 on MDCK cells, confirming low toxicity. The results of the study on the cytotoxicity of IDLC suggest a cytotoxic effect on tumor cell lines such as HepG2, HeLa, AGS, K562, and H9, as well as normal cell lines MeT-5A. Therefore, it can be estimated that IDLC has the potential to be a new drug with antitumor activity against these cell lines. The research confirms that iodine can be effectively stabilized within a dextrin-lithium framework to yield a biologically active, thermally resistant complex, suitable for pharmaceutical use.
    Цитирования (OpenAlex) 3
  • Некоторые метрики заблокированы вашими 
    Тип записи:Публикация,
    Physicochemical Characteristics and Prospects of Carbon Nanomaterials and Composites for Gas Sorption
    (Multidisciplinary Digital Publishing Institute, 2026-02-04)
    Nazym Asanbek
    ;
    Almagul Kerimkulova
    ;
    Leticia Fernández Velasco
    ;
    ;
    This review presents a modern comprehensive analysis of the physicochemical characteristics of carbon materials for the sorption of gases. The main classes of carbon sorbents are considered as follows: nanotubes, activated carbon, graphene, fullerene, composite materials, and organic vapors. Modern methods of modification of carbon materials are systematized. Particular attention is paid to the effect of particle size, morphology, and porous structure on the kinetics and equilibrium characteristics of adsorption. The results of experimental and theoretical studies of the adsorption of the gases (CO2, SO2, NOx, H2S, NH3, and CO) are analyzed. A comparative economic analysis of carbon materials is carried out, taking into account the cost of production and estimated costs of modification. Modern areas of application of carbon sorbents are analyzed as follows: industrial gas purification, automotive filters, air conditioning systems, personal protective equipment, and gas sensors. Particular attention is paid to the study of the prospects and future of materials. Prospective development directions are considered, including the creation of hierarchically porous structures, the development of self-healing materials, and integration with artificial intelligence to optimize adsorption processes. The cost of graphene and nanotube production is predicted to decrease by 50–70% by 2030, which will lead to an expansion of their commercial application.
    Цитирования (OpenAlex) 3
  • Некоторые метрики заблокированы вашими 
    Тип записи:Публикация,
    Impact of Zeolites on Growth Dynamics of Medicago sativa and Lactuca sativa in Hydroponics
    (Multidisciplinary Digital Publishing Institute, 2026-02-28)
    Yerlan Doszhanov
    ;
    Dana Akhmetzhanova
    ;
    Leticia Fernández Velasco
    ;
    Korlan Khamitova
    ;
    Arman Zhumazhanov
    In Kazakhstan, food safety is a pressing issue due to water and soil pollution. This study examined the effect of natural zeolite as an alternative hydroponic substrate on the physicochemical properties of the medium and the physiological and metabolic responses of two agricultural crops: Medicago sativa L. and Lactuca sativa L. BET analysis revealed that the zeolite possesses a substancial specific surface area (22 m²/g), ensuring effective moisture retention and gradual nutrient release. After plant cultivation, these parameters decreased moderately, confirming the filling of the pores with organic compounds without loss of key properties. In experiments with Medicago sativa, zeolite provided better aeration and stable moisture, promoting the development of a branched root system and increased seedling viability compared to an artificial substrate. Metabolic analysis of three Lactuca sativa varieties revealed cultivar-specific adaptive responses. Zeolite increased the synthesis of fatty acids and their derivatives, reflecting membrane-protective restructuring, while sugar and terpenoid content varied depending on the variety. The results confirm the suitability of zeolite as a stable substrate for hydroponic production, allowing for optimized water consumption, improved root development, and enhanced physiological stability of plants.
    Цитирования (OpenAlex) 2
  • Некоторые метрики заблокированы вашими 
    Тип записи:Публикация,
    Адсорбция препарата «Вольтарен» на пористых углеродных материалах в статических и динамических условиях
    (2026-04-06)
    Jakpar Jandosov
    ;
    Alzhan Baimenov
    ;
    ;
    Е.О. Досжанов
    ;
    D. Chenchik
    The article investigates the adsorption of diclofenac (pure API and as part of the Voltaren preparation) on porous carbon materials obtained from rice husks by chemical activation methods (H3PO4, K2CO3, KOH), as well as on synthetic carbon from xerogel. A comparative assessment of the sorption capacity and the kinetics of the process was carried out under static and dynamic conditions. It was found that the KOH-activated sample (SBET = 2610 m2/g) has the highest microporosity and demonstrates the maximum adsorption capacity (up to 956 mg/g in static and up to 1016 mg/g in a column with a fixed layer). Kinetic data is well described by a pseudo second-order model (R2 > 0.99), and dynamic adsorption is described by the Thomas model (R2 = 0.998). This allows us to predict the efficiency of sorbents in flow systems. There was no significant effect of the auxiliary components of the dosage form on the sorption process. The established patterns indicate the predominant interaction of the diclofenac molecule with the microporous carbon matrix through π–π interactions and electrostatic effects. The results obtained confirm the prospects of alkaline-activated carbon materials based on biomass for the development of effective enterosorbents for intoxication with nonsteroidal anti-inflammatory drugs.
  • Некоторые метрики заблокированы вашими 
    Тип записи:Публикация,
    Биошикізат негізіндегі кеуекті көміртекті сорбциялық материалдар алу және физика-химиялық қасиеттерін зерттеу
    (2026-04-06)
    А.Р. Керимкулова
    ;
    Е.Ж. Ермолданов
    ;
    Н.М. Асанбек
    ;
    ;
    А.Н. Жумагалиева
    For the first time, an approach to the production of highly efficient porous carbon sorption materials based on lignocellulose agricultural waste has been developed and a comprehensive assessment of their physico-chemical properties has been carried out. Rice husks (RH), walnut shells (WSh), wheat straw (WSt) and pine sawdust (PS) were used as raw materials. The resulting carbonysates were chemically activated with potassium hydroxide at different mass ratios of the activating agent and the carbon matrix. To increase the surface chemical activity of sorbents, potassium hydroxide was used. The morphology of the surface and the elemental composition of the synthesized materials were studied using scanning electron microscopy and energy dispersion analysis, and the functional groups were studied using Fourier transform infrared spectroscopy (FTIR). It has been established that an increase in the degree of activation leads to the development of a hierarchical porous structure with the formation of micro-, meso- and macropores, as well as to an increase in the content of oxygen- and nitrogen-containing functional groups on the surface of carbon materials. The greatest microporosity was achieved with a KOH:carbon mass ratio of 1:4. The formed functional structure helps to increase the sorption capacity of materials in relation to toxic pollutants of various nature. The results obtained confirm the prospects of using synthesized carbon sorbents as environmentally safe and economically feasible materials for cleaning air and water environments.
  • Некоторые метрики заблокированы вашими 
    Тип записи:Публикация,
    Production of Packaging Materials by Recycling of Corn and Common Reed Fibers with the Addition of Wollastonite: Structural and Mechanical Properties
    (Multidisciplinary Digital Publishing Institute, 2026-05-24)
    Yerlan Doszhanov
    ;
    Adilkhan Orazbayev
    ;
    ;
    Saule Kaldybayeva
    ;
    Aigerim Kerimkulova
    This study explores the possibility of making cardboard and molded egg carton packaging from corn residues and common reed as alternatives to wood-based pulp. Six formulations were made: corn husks (CHs), corn leaves (CLs), corn leaves (35%) plus corn husks (30%) and a corn blend (15%) of wollastonite (CaSiO3) (CH + CL + W), a corn blend (CH + CL: husks 60%, leaves 40%), mixed corn waste (MCW) and shredded common reed (SR). Optical microscopy was used to evaluate the fiber morphology, including the calculation of the flexibility coefficient, the cell wall rigidity and the Runkel ratio, for raw materials and fiber after alkaline hydrolysis and casting of egg cartons in silicone molds. The grammage, burst strength and index, folding endurance, thickness and moisture content were measured in the cardboard samples, while warping, compressive deformation, moisture and ink absorption were measured in the egg cartons. The flexibility coefficient of the common reed fibers (64.5%) was better than that of the corn fibers (23.6%), and so was the Runkel ratio (0.86 vs. 1.2). In the case of cardboard formulations, the maximum burst strength (462.4 kPa) and the maximum burst index (3.0 kPa·g/m2) values were obtained with the MCW formulation, and the highest folding endurance (42 and 38 double folds) was obtained with the CH and SR formulations, respectively. The addition of wollastonite improved folding endurance to 28 double folds and reduced moisture content to 4.1%, whereas the moisture content was reduced but burst strength decreased to 250.5 kPa. Egg cartons made from corn were found to satisfy all the requirements tested for good packaging, while the reed-based cartons were found to have inadequate ink absorbency time (20 min), making them less printable. Overall, mixed corn residues seem to be the most promising raw materials for sustainable packaging, and wollastonite can be used to adjust the flexibility–strength balance.