Materials

Показано: 1 - 2 из 2

Некоторые метрики заблокированы вашими
настройками согласия
Structure and Properties of Al–CNT-Based Composites Manufactured by Different Methods: A Brief Review
(Multidisciplinary Digital Publishing Institute, 2025-01-06)
Marat Nurguzhin
;
Marat Janikeyev
;
Myrzakhan Omarbayev
;
Azira Muratovna Yermakhanova
;
Mohammed Nurgazyuly Meiirbekov
Aluminum–carbon nanotube (Al–CNT) composites represent a cutting-edge class of materials characterized by their exceptional mechanical, thermal, and electrical properties, making them highly promising for aerospace, automotive, electronics, and energy applications. This review systematically examines the impact of various fabrication methods, including conventional powder metallurgy, diffusion and reaction coupling, as well as adhesive and reaction bonding on the microstructure and performance of Al–CNT composites. The analysis emphasizes the critical role of CNT dispersion, interfacial bonding, and the formation of reinforcing phases, such as Al4C3 and Al2O3, in determining the mechanical strength, wear resistance, corrosion resistance, and thermal stability of these materials. The challenges of CNT agglomeration, high production costs, and difficulties in controlling interfacial interactions are highlighted alongside potential solutions, such as surface modifications and reinforcement strategies. The insights presented aim to guide future research and innovation in this rapidly evolving field.
Цитирования (OpenAlex) 22Цитирования (OpenCitations) 9
Некоторые метрики заблокированы вашими
настройками согласия
Synthesis of New Complex Ferrite Li0.5MnFe1.5O4: Chemical–Physical and Electrophysical Research
(Multidisciplinary Digital Publishing Institute, 2024-07-30)
Mukhametkali Musagalievich Mataev
;
Altynai Madiyarova
;
Gennady Semenovich Patrin
;
Moldir Rashidovna Abdraimova
;
Marzhan Nurbekova
In this article, the sol–gel method was used as a synthesis method, which shows the physicochemical nature of the synthesis of a new complex material, ferrite Li0.5MnFe1.5O4. The structure and composition of the synthesized ferrite were determined by X-ray phase analysis. According to analysis indicators, it was found that our compound is a single-phase, spinel-structured, and syngony-cubic type of compound. The microstructure of the compound and the quantitative composition of the elements contained within it were analyzed under a scanning electron microscope (SEM). Under a scanning electron microscope, microsystems were taken from different parts of Li0.5MnFe1.5O4-type crystallite; the elemental composition of crystals was analyzed; and the general type of surface layer of complex ferrite was shown. As a result, given the fact that the compound consists of a single phase, the clarity of its construction was determined by the topography and chemical composition of the compound. As a result, it was found that the newly synthesized complex ferrites correspond to the formula Li0.5MnFe1.5O4. The particles of the formed compounds have a large size (between 50.0 μm or 20.0 μm and 10.0 μm). Electrophysical measurements were carried out on an LCR-800 unit at intervals of 293–483 K and at frequencies of 1.5 and 10 kHz. An increase in frequency to 10 kHz led to a decrease in the value ε in the range of the studied temperature (293–483 K).
Цитирования (OpenAlex) 4Цитирования (OpenCitations) 4

Materials

Фильтры

Настройки

Сортировать по

результатов на странице