Materials

ISSN

1996-1944

Издатель

Multidisciplinary Digital Publishing Institute

Ключевые слова

Concrete and Cement M...

Innovative concrete r...

Additive Manufacturin...

Surface Treatment and...

Bone Tissue Engineeri...

Публикации в журнале

Показано: 1 - 5 из 5

Некоторые метрики заблокированы вашими
настройками согласия
Impact of Neodymium and Scandium Ionic Radii on Sorption Dynamics of Amberlite IR120 and AB-17-8 Remote Interaction
(Multidisciplinary Digital Publishing Institute, 2021-09-18)
Talkybek Jumadilov
;
Bakytgul Totkhuskyzy
;
Zamira Malimbayeva
;
R. G. Kondaurov
;
А. М. Imangazy
The aim of the work is to provide a comparative study of influence of ionic radii of neodymium and scandium ions on their sorption process from corresponding sulfates by individual ion exchangers Amberlite IR120, AB-17-8 and interpolymer system Amberlite IR120-AB-17-8. Experiments were carried out by using the following physicochemical methods of analysis: conductometry, pH-metry, colorimetry, and atomic-emission spectroscopy. Ion exchangers in the interpolymer system undergo remote interactions with a further transition into highly ionized state. There is the formation of optimal conformation in the structure of the initial ion exchangers. A significant increase of ionization of the ion-exchange resins occurs at molar ratio of Amberlite IR120:AB-17-8 = 5:1. A significant increase of sorption properties is observed at this ratio due to the mutual activation of ion exchangers. The average growth of sorption properties in interpolymer system Amberlite IR120:AB-17-8 = 5:1 is over 90% comparatively to Amberlite IR120 and almost 170% comparatively to AB-17-8 for neodymium ions sorption; for scandium ions sorption the growth is over 65% comparatively to Amberlite IR120 and almost 90% comparatively to AB-17-8. A possible reason for higher sorption of neodymium ions in comparison with scandium ions is maximum conformity of globes of internode links of Amberlite IR120 and AB-17-8 after activation to sizes of neodymium sulfate in an aqueous medium.
Цитирования (OpenAlex) 14Цитирования (OpenCitations) 9
Некоторые метрики заблокированы вашими
настройками согласия
Structure and Properties of Al–CNT-Based Composites Manufactured by Different Methods: A Brief Review
(Multidisciplinary Digital Publishing Institute, 2025-01-06)
Marat Nurguzhin
;
Marat Janikeyev
;
Myrzakhan Omarbayev
;
Azira Muratovna Yermakhanova
;
Mohammed Nurgazyuly Meiirbekov
Aluminum–carbon nanotube (Al–CNT) composites represent a cutting-edge class of materials characterized by their exceptional mechanical, thermal, and electrical properties, making them highly promising for aerospace, automotive, electronics, and energy applications. This review systematically examines the impact of various fabrication methods, including conventional powder metallurgy, diffusion and reaction coupling, as well as adhesive and reaction bonding on the microstructure and performance of Al–CNT composites. The analysis emphasizes the critical role of CNT dispersion, interfacial bonding, and the formation of reinforcing phases, such as Al4C3 and Al2O3, in determining the mechanical strength, wear resistance, corrosion resistance, and thermal stability of these materials. The challenges of CNT agglomeration, high production costs, and difficulties in controlling interfacial interactions are highlighted alongside potential solutions, such as surface modifications and reinforcement strategies. The insights presented aim to guide future research and innovation in this rapidly evolving field.
Цитирования (OpenAlex) 22Цитирования (OpenCitations) 9
Некоторые метрики заблокированы вашими
настройками согласия
Ion Exchange Dynamics in Cerium Nitrate Solution Regulated by Remotely Activated Industrial Ion Exchangers
(Multidisciplinary Digital Publishing Institute, 2021-06-23)
Talkybek Jumadilov
;
L.K. Yskak
;
А. М. Imangazy
;
О. V. Suberlyak
Many technological solutions contain valuable components as waste and can become an additional source of rare-earth elements to meet the needs of modern production. The development of technologies based on commercially available and cheap sorbents reveals the possibility for rare earth recovery from various solutions. This paper provides research on using a combination of KU-2-8 and AV-17-8 ion exchangers in different molar ratios for cerium ions sorption from its nitrate solution. The mutual activation of the ion exchangers in an aqueous medium provides their transformation into a highly ionized state by the conformational and electrochemical changes in properties during their remote interaction. The ion exchange dynamics of solutions were studied by the methods of electrical conductivity, pH measurements, and atomic emission analysis of the solutions. The research showed that the maximum activation of polymers was revealed within the molar ratio of KU-2-8:AV-17-8 equal to 3:3. In more detail, in comparison to AV-17-8, this interpolymer system showed an increase in the sorption degree by more than 1.5 times after 6 h of interaction. Moreover, compared with KU-2-8, the same interpolymer system showed an increase in the degree of cerium ions sorption by seven times after 24 h of interaction. As a result, the total cerium ions sorption degree after 48 h of sorption by individual KU-2-8 and AV-17-8 was 38% and 44%, respectively, whereas the cerium ions sorption degree by the same interpolymer system in the molar ratio 3:3 became 51%. An increase in the sorption degree of cerium ions by the interpolymer system in comparison with individual ion exchangers can be explained by the achievement of a high ionization degree of ion exchangers being activated in the interpolymer system by the remote interaction effect.
Цитирования (OpenAlex) 21Цитирования (OpenCitations) 21
Некоторые метрики заблокированы вашими
настройками согласия
Effective Sorption of Europium Ions by Interpolymer System Based on Industrial Ion-Exchanger Resins Amberlite IR120 and AB-17-8
(Multidisciplinary Digital Publishing Institute, 2021-07-09)
Talkybek Jumadilov
;
Kh. Khimersen
;
Zamira Malimbayeva
;
Kondaurov Ruslan Gennadievich
The research is aimed at checking the impact of a remote interaction phenomenon on growth of sorption properties of ion-exchange resins during sorption of europium ions. Industrial ion exchangers Amberlite IR120 and AB-17-8 were selected as objects for the study. Investigation was undertaken using the following physico-chemical methods of analysis: conductometry, pH-metry, colorimetry, Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), and atomic emission spectroscopy. Remote interaction of the initial ion exchangers in the interpolymer system leads to their transition into highly ionized state due to formation of optimal conformation. Found that high ionization areas of Amberlite IR120 and AB-17-8 are the molar ratios Amberlite IR120:AB-17-8 = 4:2 and 1:5. The remote interaction effect provides significant increase of the following sorption properties: sorption degree, polymer chain binding degree, effective dynamic exchange capacity. A strong increase of the sorption properties (average increase for all time of remote interaction is over 50%) in the interpolymer system Amberlite IR120-AB-17-8 was observed with individual polymer structures of Amberlite IR120 and AB-17-8. The remote interaction phenomenon can be successfully used for effective modification of industrial ion exchangers for sorption of rare-earth metals.
Цитирования (OpenAlex) 7Цитирования (OpenCitations) 6
Некоторые метрики заблокированы вашими
настройками согласия
Synthesis of New Complex Ferrite Li0.5MnFe1.5O4: Chemical–Physical and Electrophysical Research
(Multidisciplinary Digital Publishing Institute, 2024-07-30)
Mukhametkali Musagalievich Mataev
;
Altynai Madiyarova
;
Gennady Semenovich Patrin
;
Moldir Rashidovna Abdraimova
;
Marzhan Nurbekova
In this article, the sol–gel method was used as a synthesis method, which shows the physicochemical nature of the synthesis of a new complex material, ferrite Li0.5MnFe1.5O4. The structure and composition of the synthesized ferrite were determined by X-ray phase analysis. According to analysis indicators, it was found that our compound is a single-phase, spinel-structured, and syngony-cubic type of compound. The microstructure of the compound and the quantitative composition of the elements contained within it were analyzed under a scanning electron microscope (SEM). Under a scanning electron microscope, microsystems were taken from different parts of Li0.5MnFe1.5O4-type crystallite; the elemental composition of crystals was analyzed; and the general type of surface layer of complex ferrite was shown. As a result, given the fact that the compound consists of a single phase, the clarity of its construction was determined by the topography and chemical composition of the compound. As a result, it was found that the newly synthesized complex ferrites correspond to the formula Li0.5MnFe1.5O4. The particles of the formed compounds have a large size (between 50.0 μm or 20.0 μm and 10.0 μm). Electrophysical measurements were carried out on an LCR-800 unit at intervals of 293–483 K and at frequencies of 1.5 and 10 kHz. An increase in frequency to 10 kHz led to a decrease in the value ε in the range of the studied temperature (293–483 K).
Цитирования (OpenAlex) 4Цитирования (OpenCitations) 4

Materials

Фильтры

Настройки

Сортировать по

результатов на странице