Жарияланымдар / Публикации

Постоянный URI для этого сообществаhttps://cris.qyzpu.kz/handle/123456789/2

Просмотр

Фильтры

2025 - 20263

Настройки

Есть файлы: ДаТема: search.filters.subject.rice husk

Результаты поиска

Показано: 1 - 3 из 3
  • Загрузка...
    Изображение-миниатюра
    Некоторые метрики заблокированы вашими 
    настройками согласия
    Тип записи:Публикация,
    PRODUCTION OF MICROCRYSTALLINE CELLULOSE FROM AGRICULTURAL WASTE AND PREPARATION OF GEL FILMS BASED ON IT
    (2025-10-22)
    M. K. Shamshidenov
    ;
    Yerkebulan A. Altynov
    ;
    B. U. Rakhimova
    ;
    Kalampyr Bexeitova
    ;
    A. Seithan
    This paper discusses the process of obtaining microcrystalline cellulose by removing lignin from biomass and studying its properties. Rice husks, which are agricultural waste, were used as biomass. The effect of the ratio of biomass to peroxyacetic acid on the yield of microcrystalline cellulose was determined. The yield of microcrystalline cellulose from rice husks at a ratio of 1/14 was 70%. Additionally, gel films based on rice MCC and sodium alginate were prepared, and their hydrolytic degradation properties were studied. In an acidic medium (pH 4.08), the gel film showed a 66% mass loss within 7 days, indicating pH sensitivity and biodegradability. The morphological surface, average particle size, and structure of the samples were studied. The surface morphology of the samples was examined using a scanning electron microscope, and it was found that the average particle size was 7–10 µm. X-ray diffraction (XRD) analysis confirmed the amorphous–crystalline nature of the material. Fourier-transform infrared spectroscopy (FTIR) confirmed the presence of hydroxyl, carbonyl, and ether functional groups. Thermogravimetric analysis (TGA) demonstrated the thermal stability of the gel films. The developed method for producing microcrystalline cellulose from biomass requires fewer processing stages compared to traditional methods and is environmentally safe. It was shown that high-quality microcrystalline cellulose can be obtained in one stage without the use of reagents containing sulfur and chlorine, high pressure, or large amounts of water. The interest in microcrystalline cellulose is due to its unique properties, such as lightness, non-toxicity, biocompatibility, and biodegradability. Currently, it is in high demand in the production of aerogels, gels, biocomposites, biodegradable materials, and films.
  • Загрузка...
    Изображение-миниатюра
    Некоторые метрики заблокированы вашими 
    настройками согласия
    Тип записи:Публикация,
    ADSORBENTS BASED ON MODIFIED NANOCELLULOSE: WATER PURIFICATION FROM ORGANIC AND INORGANIC POLLUTANTS
    (Shakarim University, 2026-07-29)
    Zhexenbek Toktarbay
    ;
    Makhabbat Kunarbekova
    ;
    B. U. Rakhimova
    ;
    Kenes Kudaibergenov
    ;
    Dana Ashiraliyeva
    Against the backdrop of rapid industrial growth, water pollution has become a pressing global environmental issue. This review provides a systematic analysis of the efficiency of functionalized nanocellulose- based adsorbents for the removal of organic (synthetic dyes, phenols, antibiotics, pesticides) and inorganic (Pb 2+ , Cd 2+ , Hg 2+ , Cr(VI), Cu 2+ , As) pollutants from water. Key findings: the highest sorption capacities are achieved by TEMPO-oxidized nanocellulose and amine-functionalized composites – up to 2500 mg/g for methylene blue and up to 2270 mg/g for lead ions. Nanocellulose-based molecularly imprinted polymers (MIPs) selectively adsorb phenols with efficiencies of up to 97% even in the presence of structurally similar competitors. Most adsorbents reviewed retain 80+90% of their capacity after 20 regeneration cycles. The paper examines three main types of nanocellulose (CNC, NFC, BNC), their preparation methods (acid hydrolysis, TEMPO-oxidation, mechanical and enzymatic treatment), and surface functionalization strategies (isocyanate-based, amine- and thiol-functionalization). The alignment of nanocellulose production from agricultural waste (rice husks, soybean hulls) with sustainable development principles is emphasized. Key unresolved challenges – scale-up, stability in real wastewater matrices, and cost-effectiveness – and future research directions are also identified.
  • Загрузка...
    Изображение-миниатюра
    Некоторые метрики заблокированы вашими 
    настройками согласия
    Тип записи:Публикация,
    Functional Nanostructured Carbon Honeycomb Monoliths for Hemoadsorption: Preliminary Studies on Biocompatibility, Protein-Bound Uremic Toxins and Inflammatory Cytokines Elimination
    (Multidisciplinary Digital Publishing Institute, 2026-09-07)
    Jakpar Jandosov
    ;
    Carol Angela Howell
    ;
    Susan R. Sandeman
    ;
    D. Chenchik
    ;
    Sergey V. Mikhalovsky
    Rice husk (RH) is a renewable siliceous lignocellulosic waste providing a unique, greener and less toxic alternative to conventional synthetic polymeric precursors in the production of carbon-based materials for biomedical applications. In this work we studied the porous structure of RH-lignin-based activated carbon produced in the form of honeycomb carbon monoliths and assessed their potential as hemoadsorbents for blood purification in the treatment of patients with serious medical conditions, such as kidney failure and sepsis. To determine their clinical suitability for such an application, the hemocompatibility and cytotoxicity of the monoliths were investigated using the standard ISO guidelines. The monoliths did not cause any changes in the cell viability or cell lysis. High micro/mesoporosity and surface chemistry of the initial monolith-C, N- and P-doped nanostructured carbon honeycomb monoliths were established by low-temperature nitrogen adsorption (LTNA) studies, mercury porosimetry data (MIP), SEM/EDS analysis and FT-IR spectroscopy. The micro-mesoporous, activated carbon-based filtration/adsorbent prototype devices, in the form of three-dimensional (3D) carbon matrix, functionalized with ion-exchange amino- and phosphate groups and encased in polyolefin heat shrink cable sleeve, have been developed with the capacity to remove protein-bound uremic toxins (PBUTs), such us PCS and IS, as well as inflammatory cytokines (IL-6 and IL-8) from human plasma in a flowing model system. The ammoxidized monolith-N, derived from the monolith-C, had the highest removal efficiency (40.05% for PCS, and 28.4% for IL-6). By contrast, phosphorylated monolith-P demonstrated the highest removal efficiency (54.62% for IS, and 54.4% for IL-8), whilst the monolith-C has the lowest removal efficiency for these adsorbates. These results do not correlate with the LTNA and MIP study results, suggesting that the interaction of surface chemical functional groups with the solutes play key roles in the adsorption mechanism. The ion-exchange mechanism of PBUTs and inflammatory cytokine chemisorption by the monoliths, modified with surface N- and P-containing functional groups, has been proposed.